⚡ Power Supplied by a Complex Wave
1. Waveform Controls
2. Complex Voltage and Current Waveforms
i(t) = i₁(t) + i₃(t) + i₅(t) + i₇(t)
3. Instantaneous Power
The instantaneous power waveform contains a constant/average component as well as oscillating components. The average value of this waveform over one complete fundamental cycle is the real power supplied to the load.
4. Average Power of Each Harmonic
Fundamental
3rd Harmonic
5th Harmonic
7th Harmonic
Total Average Power
5. Harmonic Power Contribution
6. Calculation Table
| Harmonic | Voltage RMS | Current RMS | Power Factor | Average Power |
|---|---|---|---|---|
| 1st | 0 V | 0 A | 0.90 | 0 W |
| 3rd | 0 V | 0 A | 0.85 | 0 W |
| 5th | 0 V | 0 A | 0.80 | 0 W |
| 7th | 0 V | 0 A | 0.75 | 0 W |
| Total | 0 W | |||
How the Simulation Works
A complex periodic waveform can be represented as the sum of a fundamental component and harmonic components. In this simulation the voltage and current are represented by the 1st, 3rd, 5th and 7th harmonics. For each harmonic, the average real power is calculated using:
The simulation then adds the individual harmonic power contributions:
Notice that increasing a harmonic’s voltage or current amplitude increases its corresponding power contribution. The instantaneous power waveform may look highly distorted even though the average power can still be represented by the sum of the harmonic contributions.